Sat, 12 Sep 2020 20:15:30 +0800 http://www.duyi34.icu/blog/feed/ Professional window tint tool online store, provide car window film application tint tool with wholesale price srpead UK,australia,USA,cananda and all over the world. Buy cheap auto glass tint tool from our vehicle window film tint installation tool manufacturer! http://www.duyi34.icu/blog/feed/ www.duyi34.icu www.duyi34.icu http://www.duyi34.icu/favicon.ico http://www.duyi34.icu/blog/feed/ Professional window tint tool online store, provide car window film application tint tool with wholesale price srpead UK,australia,USA,cananda and all over the world. Buy cheap auto glass tint tool from our vehicle window film tint installation tool manufacturer! http://www.duyi34.icu/ <![CDATA[Tint Tool Tips For DIY Window Film Installation]]> At first,you should make full preparation for tools, such as:

A film aid application concentrate (or no-tears baby shampoo)

Bottled water (not tap water) 

Spray bottle

Squeegee

Tint tool

Break-away utility knife (for cutting film)

Single-edged razor blade (for cleaning glass)

Ruler or tape measure

Soft, lint-free cloth or paper coffee filters (for cleaning the glass and film)

Before You Begin:


Residential window films are applied directly to the inside glass surface you can touch inside your home. If you have a removable storm pane, you may remove it and apply the film to the inside surface of the outermost window, then remount the storm pane.

Applying window film is a simple process, with only a few basic steps. However, patience and preparation are very important. Before beginning this project, please read the instructions completely and carefully, perhaps using a small piece of film to practice the steps before you actually tint a window. Many first-time users feel more confident after tinting a few, small windows. Start with smaller windows before applying film to larger windows, such as patio doors, which may require two people.

Preparation:

a. Fill a pump- or trigger-spray bottle with a soapy water solution: to 1qt. bottled water, add a bottle of a film aid concentrate (or 1/4 tsp of a no-tears baby shampoo without conditioner). Film Aid offers the best drying clarity and pH balance. Do not use hard tap water, which can leave spots under the film. VERY IMPORTANT: This soapy water solution (“the Solution”) will serve as a lubricant for the squeegee during glass cleaning, film application, and future cleaning. CAUTION: Do not use any household glass cleaner containing ammonia or vinegar to clean the glass or film; such cleaners can dilute or dissolve the film’s adhesive. However, extremely greasy or smoke-covered windows may need to be cleaned first with glass cleaner then rinsed thoroughly with the Solution.

b. Plan to use several single-edge utility razor blades to clean the window. A small utility knife with breakaway blades is the best tool for trimming film. NOTE: Film can dull a blade edge quickly; and a dull blade can tear film. Plan to use a new blade after every 10’ of film that you cut.

c. A rubber-blade squeegee is necessary to press the film onto the window without creases and to remove the soapy water from under the film. We recommend a squeegee between 6” to 8” wide, preferably with a flexible blade and solid handle. A quality squeegee is a good investment because you will use it to clean the glass, apply the film, and clean the film in the future.

d. Use lint-free toweling (paper coffee filters work amazingly well!), not paper towels, to clean the windows and absorb squeegeed water.

e. To trim the film (Step 8), use the edge of a ruler or a 50-cent coin or a dedicated wallpaper trimmer.


]]>
www.duyi34.icu 2020-02-12 12:02
<![CDATA[Get Your Auto in Tip-top Shape For Summer--Car-cleaning Guide (2)]]>

The Exterior

A warm, sunny spot might seem like the perfect place to wash and dry your car, but it guarantees streaks. Wash in the early morning or evening, or in a shady area.

Rinse it

1,Hose off loose dirt.

2,Life the windshield wipers and spray the cracks below both windshields.

3,Blast the undersides of the wheel wells and the hubcaps.

Wash it
1,Make sure your wash mitt is clean. "We've seen people ruin their finish because they didn't rinse off the grime on the mitt before washing it," says Robert Traicoff, supervisor of paint materials for the Ford Motor Comp

2,One-eighth of a cup of mild dishwashing liquid, like Dove, in a bucket of water is fine for unwaxed finishes. Starting with the roof, soap an arm's-length-size section with your wash mitt and rinse it immediately. Then tackle the hood, the sides, and the trunk, in that order, using the same method, so you go from most to least clean for the sake of the soapy water.

3,To prevent streaking, don't suds up the windows (you'll wash them separately).

4,Use a separate sponge to scrub only the especially grimy areas: the windshield wipers and the tires. Save the right front wheel for last because it gets the dirtiest ― it hits the puddles and loose gravel on the side of the road.

5,To remove tar, saturate a cloth with a mixture of 1/4 cup vinegar and 1/2 teaspoon linseed oil; rub into the tar and remove.

Rinse again

1,Sluice off your car, making sure to power the soap out of nooks such as the rim of the gas-cap cover, under the door handles, and the innards of the side-view mirrors. Soap seeps out and streaks the car ― usually moments after you've finished drying the car and put everything away.Dry it

2,Before water spots have a chance to mar the finish, use a towel to mop up the surface. Fold the towel as it gets damp.

3,If you have a chamois, use it to mop up any remaining dampness.

4,Remember to dry spots like the roof line just above the windows, which could spill excess water later when you move the car.

Do windows

1,Bugs, grease, and grime make auto glass harder to clean than the windows in your house. A detailer's favorite for cleaning windows and bug-spattered headlights is a solution of one part white vinegar to two parts water.

2,To avoid streaking, give the window weather stripping a few hours to dry before you roll down the windows.

Window tint application tool kit;

Paint protection film installation tool;

Window tint tool.


]]>
www.duyi34.icu 2019-12-23 11:33
<![CDATA[Get Your Auto in Tip-top Shape For Summer--Car-cleaning Guide (1)]]> Keeping your auto filth-free can boost its resale value and eradicate those nasty end-of-lease excess-wear-and-tear charges. And if you focus on the task at hand, it shouldn't take more than an hour every two weeks.

Now let's start from the interior

Dash and doors

1,Using an electrostatic dust cloth, sweep the dash, knobs, vinyl surfaces, and plastic trim.

2,Wipe them down with an all-purpose cleaner using an old towel.Pesky gearshift

3,Gently pull the leather or plastic away from the sides to vacuum it and wipe it down with a cleanser-dampened towel.Floor and seats

4,Start by taking out the floor mats and shaking them. If you don't have floor mats, get them―they protect the carpeting and can be replaced if stained beyond repair. If your region gets a lot of snow or rain, you might want to buy a rubber mat with deep channels to collect mud, sand, and salt (two front mats for inclement weather that each hold more than a quart of liquid, $70,griotsgarage.com).

5,Vacuum the mats, the seats, and the floor carpeting, in that order. Slide the front seats all the way back and make sure to get the debris (spare change and fossilized French fries) from under the front seats. Then move the seats all the way forward and vacuum underneath from the backseat.

6,Tilt the seats back so you can get the nose of the vacuum down in the cracks.Windows and windshield

7,A microfiber cloth and a spritz of water clean well and won't cause streaks.

8,Roll down the windows a few inches to get the grime on the top edges.

9,For the rear window, use the back of your hand so you don't strain your wrist.

More tint toolvinyl wrap toolppf tool please visit our tinting tool wholesale online store.

]]>
www.duyi34.icu 2019-11-28 13:17
<![CDATA[To Get Both Minor Superficial and Deep Scratches Off,You Should Need...]]> Tool or Material Use:

Car Buffer --- A car buffer is used for superficial scratch repair and for buffing out scratches,.


Buffing Compound --- Buffing compound is used for superficial scratch repair and for buffing out scratches.

Clear Coat Paint --- Clear coat paint is used for superficial scratch repair and for touching up scratches.

Bumper Repair Kit --- Bumper repair kits are used for deep scratch repair and for filling in scratches.

Squeegee --- Squeegees are used for deep scratch repair and for applying filler.

Paint Leveler --- Paint levelers are used for deep scratch repair and for removing excess filler, for more car wrap tool.

Wax and Grease Remover --- Wax and grease removers are used for deep scratch repair and for prepping for paint.

Touch-Up Paint --- Touch-up paint is used for deep scratch repair and for painting filler to match the car, though manufacturers should be consulted in this case, maybe you need ppf tool too.

here are a few other tint tool and materials that are necessary to complete these repairs, but they are common household items such as cloths and razors.
]]>
www.duyi34.icu 2019-09-20 10:59
<![CDATA[What A Good Window Squeegee Should be?]]> A good squeegee will feature with rubber handle. Handles that are rubber are usually considered the best because you can normally get a better grip on the squeegee, and you won't have to worry as much about it slipping out of your hand as you work. Plastic-handled window squeegees tend to slip and may also crack if they fall to the ground from a high elevation. If a rubber-handled squeegee falls, the handle will likely not incur much damage, and you should be able to go on using it with no problems. Another thing to look at when you purchase your window squeegee is the rubber blade. You may want to get a squeegee with a very sharp rubber blade because the sharper blades tend to do a much better job of removing water and other residue from windows. The rubber may dull over time, and for this reason you may want to choose a window squeegee that has a reversible blade so you can turn over the dull blade and use the sharper side.The material from which your window squeegee is made might also be important to consider. Squeegees usually come in plastic, brass, and stainless steel. Plastic squeegees may be less expensive, but these likely will not last as long. Brass is considered a good quality material, but it can be heavy, and it might begin to rust over time. Stainless steel squeegees have a great reputation for durability, and they tend to last for many years.Before purchasing your Window Tint Squeegees, think about the windows in your home. If you have very large windows, you might want to get a larger squeegee. This could cut back on how long it takes you to clean your windows. If you choose a large squeegee, it may still be a good idea to get a small one as well to clean the smaller windows in your home or for use on your car windows.

Moreover, if you need any good Wrap Tools, this article can help you too.



]]>
www.duyi34.icu 2019-07-13 10:30
<![CDATA[How to Cleaning Home&Car Window with Squeegee]]> First,fill the bucket with half full of cold water or slightly warm water.  Spill a hand full of washing liquid or detergent according to what is available or you can apply the dish detergent onto the wet washer.Second, rub the washer or wet mop onto the glass window.Make sure you do it well enough to remove the dirt off.After that scrape any marks off with the scrapper.A warning you should pass the blade in the forward movement only to avoid bringing back dirt. Now use the Car Window Tint Squeegee while holding the handle in your right hand make sure your thumb is half way between the top and side.Make sure you put it on the glass with an angle of about 45 degrees inclined,while you are doing this apply the correct amount of pressure.It is really simple once you are doing it you will notice that. After doing all that you can clean off all the water on the glass with the  The Scrubber Sure Hand squeegee.Starting from the top left all the way down and don’t forgot the edges.This is very easy anybody can do it .At this stage the rag comes into use.Use the rag to dry the edges and use it while it is stiff dry.Using rag wipe any split water on the window and the floor. This is the last stage where you check for any marks that did not come off.In case of any marking use a small part of the rag to rub it off.

Wow, I think your window will be done and looking amazing and clean!

How about this 8" Pro Power Squeegee?

]]>
www.duyi34.icu 2019-04-21 09:47
<![CDATA[Few Steps to Choose Proper Auto Magnets]]> 1) Check the door
Check to see if a refrigerator magnet will stick to the door. If not, the door is made of fiberglass and unable to hold a magnetic car sign. Try vinyl decals instead.
2) Keep It Simple
Often customers think that the more information they put on their car door magnets, the better. This is almost never the case. The best way to get your message across is to keep it simple. Your company name, phone number, and website, along with one or two services provided are plenty of information for someone to read on a moving vehicle.
3) Full Color Graphics
It is important to remember that potential clients have an extremely limited amount of time to read the information: about four seconds. High quality, full color graphics should take the place of listing all your services on your magnets. Full color attracts attention that one and two color auto magnets no longer receive. For example: A landscaping company does not need to list mowing, pruning, gardening, etc. on black and white vehicle magnets. It looks boring, and most customers won't have time to read all of the listed services anyway. Instead, try a visual image such as beautiful garden, yard, or even a lawnmower that quickly tells a customer what you do without putting it into words. If you don't have access to high quality images, keep in mind that The Color Spot offers free templates.
4) File Size 
That image that looks great on your business card might not look so good when enlarged to fit a car magnet. Unless you have a high resolution photo or your logo/image is in vector format, your file may become pixilated or distorted when enlarged. To find out, zoom in on your file 200%-800%. If the image doesn't look good, then it's not going to look good printed larger on a magnetic sign.
5) Measure Your Door 
Car magnets come in a few standard sizes to fit most any vehicle. However, it's better to measure your door before ordering to avoid getting door magnets that do not fit. Also, take into consideration any bevels and body molding. Your car door may be large enough but if there is auto molding across the middle of the door you're not going to be able to use the entire space.
6) Be Aware of Your Options 
If you want something that is more permanent, then magnetic signs may not right for you. There are numerous other options for automobile advertising; try rear window graphics, static cling, vinyl decals, or vinyl lettering to name a few. Let The Color Spot assist you in choosing the perfect product for your auto advertising needs.]]>
www.duyi34.icu 2019-03-12 10:37
<![CDATA[How to Pick Right Paint Sprayer]]> How to Pick the Right Sprayer:

Sprayers with 25 feet or more of flexible hose or a long extension cord are best for jobs that require distance, like painting a fence. An extension cord makes cleanup even easier at the end of the job.

If you need to carry your paint supply a long distance, consider a unit with wheels or a backpack.

Determine your paint capacity and how often you’ll need to refill. You might opt for a larger hopper or a unit that draws straight from the can.

Think about cleanup and whether you want a unit that comes apart for easy cleaning. Smooth interior surfaces and units that draw from the can make cleaning easier, too.

Consider an adjustable pressure control with high, low, cleaning, or roller settings to help extend the life of your spray tips.

Check how loud the sprayer is when operating.

A sprayer that takes tip extensions is great for high ceilings, foyers, and hard-to-reach spaces.

Make sure replacement parts are available.

Ask if there are digital how-to manuals, online resources, or support lines for your product.

For more information about Window Tinting Sprayer,please visit our online store:

http://www.duyi34.icu/



]]>
www.duyi34.icu 2019-01-10 10:26
<![CDATA[How to Apply Vinyl Decals ?]]> Applications for small or large vinyl decals:

process for small decals (under 15 inches):

  • Before applying make sure your printing surface is clean and dry to the touch.

  • Peel off the paper backing.
  • Apply the transfer sheet (decal still attached) to your print surface.
  • Using the included squeegee rub the entire surface of the decal through the transfer sheet.
  • Peel the transfer sheet off of the material.
  • If any part of the decal begins lifts away with the transfer sheet, go back and rub that area firmly before continuing to peel transfer sheet.
  • process for large decals (larger than 15 inches):

    For large decals (larger than 15 inches) the process is slightly more involved. We recommend doing this with two or more people for extra-large decals.

    1. Before applying make sure your printing surface is clean and dry to the touch.
    2. Lay your decal face up on a table or flat surface. Press firmly on the squeegee and run it across your entire decal. This helps ensure that the decal sticks to the transfer paper.
    3. We recommend using masking tape to mark where you want to apply your decal. You can use a level to make sure it is even.
    4. Pick up your design from the top corners. Carefully line your design up with your tape guides. Stick the exposed 2 inches of your decal to the wall.
    5. Peel the transfer sheet off of the material.
    6. Use tape to secure the top of your transfer paper to the surface.
    7. Using your squeegee smooth out the 1-2 inches that are exposed to your surface.
    8. Begin slowly pulling down the backing paper. As you go, use your squeegee to press your decal to the surface and remove any bubbles. Continue this until the backing paper is removed completely. If you make a mistake, gently peel the decal off the wall and reposition it.
    9. Once the backing is removed, go over your entire design with your squeegee pressing firmly. This will help secure your decal to your surface.
    10. Use tape to secure the top of your transfer paper to the surface.
    11. Choose a corner and begin to peel back the clear transfer paper. Keep it flat against your design as you remove it. Go slow! If you peel to quickly you may stretch out your decal. Make sure that your designs are sticking flat to the wall and not to the transfer paper. If any part is staying on the transfer paper, use your squeegee to press it to the wall and try again. Continue until the transfer paper is removed entirely.
    12. Use your squeegee to smooth out any final bubbles or creases

    ]]>
    www.duyi34.icu 2018-11-18 10:09
    <![CDATA[Causes and Solutions of Chemical Etching or Staining]]> Known as acid rain, spotting or discoloration, this kind of problem is characterized by irregularly shaped etching, discoloration or pitting that appears on your car’s paint film.

    Cause:
    When damaging natural contaminants like tree sap, acid raid, road tar and bird droppings, among others, stick to the surface of your car for a long period of time, a chemical change happens and will cause staining or chemical etching.

    Repair:
    You can mend this kind of blemish by washing your car with hot water and soap, rinsing it and then drying it thoroughly. You can also do some solvent cleaning using the proper surface cleaner. You can also wash your car using a solution of baking soda and water before rinsing it well. The appropriate mixture for this solution is one tablespoon of baking soda dissolved in every quart of water. If washing will not suffice, you can compound the blemished surface and polish it after so its gloss will be restored. If polishing does not work, you can wet sand the problem area with 1500-2000 grit sandpaper before doing the compounding and polishing process. Should refinishing be needed, you must sand the blemished area with the right sandpaper and wash it with the baking soda solution before you finally refinish. In severe chemical etching cases, you must remove the finish right up to the bare metal of your car’s surface.

    Prevention:
    Always remove harmful contaminants that can be dissolved by water through regular washing with the use of clear water and detergent. You should also wax or polish your car occasionally. As much as possible, do not park near factories that may releases chemical byproducts into the air. You should also refrain from parking under electrical wires where your car may be subjected to bird droppings or under trees where it may get contaminated with tree sap.During your car’s refinishing process, it is also best if you will make use of an acrylic urethane basecoat and clearcoat system so your car will be given maximum protection from chemical or natural elements.It is imperative for you to take note as well that when you are buffing or sanding a basecoat and clearcoat finish, you should see to it that the clearcoat film’s thickness should be at least 2 mils as this helps sustain proper protection against the ultraviolet rays of the sun. Should mending a blemished area result in the removal of more than .5 mils of clearcoat, refinishing is definitely advised.

    Here is the detail of Gasket Push Stick:http://www.duyi34.icu/Hardware-and-equipment/Car-Window-Film-Tint-Tool-red-gasket-push-sticks-p-107727.html

    ]]>
    www.duyi34.icu 2018-08-11 11:06
    <![CDATA[As a Car Painting Beginer,You Should Know..]]> Choose your car paint

    Knowing what paint to buy is very crucial in getting the outcome you want in changing your car’s color. While there have been numerous types of paints that have been used on cars, lately most car owners and paint professionals prefer urethane or the two-step acrylic enamel paints. If you were thinking of using lacquer, then you should know that this type of paint has overstayed its welcome in the paint industry and its use is even forbidden in most states in the US.

    Urethane and acrylic enamel have higher viscosity compared to lacquer, even if they are actually applied in the same way. Usually, a mixture of one part primer to a half or one part thinner is already enough to give you that beautiful color you were aiming for. As a result, you will need fewer coats when using them instead of applying 20 coatings as what was usually done when utilizing lacquer paint. Most of the time, three coatings of base color and three topcoats of clear will do the job. If you still have serious doubts about your paint choice, you can ask the help of a professional in your community to give you some pointers.

    The Spray Gun

    Just like lacquer paints, syphon spray guns are already things of the past. These high-pressure lines are no longer used mostly because of what they can contribute to the problem of pollution. Lawmakers have even banned their use in many states.

    Now, high-volume, low-pressure or HVLP spray guns are being used in painting cars. These spray guns feature tanks located at the top of the mechanism. Gravity feeds the paint into the gun instead of siphoning it from the bottle found underneath the spray gun system as with the case of the old syphon spray guns.

    Although the location of the paint tank of these new-fangled HVLP spray guns might seem inconvenient for the user, they are known to be more efficient compared to the old spray gun models. They are known to deliver 80 percent of the paint to your car’s surface while only needing a line pressure of 10psi for its operation. This is definitely low compared to the 45 to 70psi needed by the syphon guns, which deliver a lowly 40 percent efficiency.

    Safety and Preparation

    In painting your car, you also need to be concerned about your safety at all times. Because of this, you need to prepare not just the materials you need in making your car look brand new. You also have to prepare the things such as window tint squeegees that will keep you safe during the entire paining process.

    You need to buy yourself a complete paint suit to protect your clothing as well as your entire bodily system from the paint and other toxic materials you might be using. There are a number of cheap brands you can find in the market. You should also don on a respirator equipped with two air filters while you are painting. Pairing all these with gloves, goggles and some type of covering for your head will further keep you safe.

    Your work area should also be kept clean at all times. You will achieve better efficiency with your endeavor if you dirt and dust are kept away from your work. Just think how frustrating it can be if you will find just one small mistake in what could have been a perfect panel.

    It is imperative to note that before you start painting your car, especially with the use of a spray gun, you should practice first. Using test panels and making sure that your spray gun is kept clean at all times will help ensure the success of your painting endeavor.

    ]]>
    www.duyi34.icu 2018-07-26 10:39
    <![CDATA[What Should a Tinter Have in the Kit!]]> No matter professionals or DIY tinters, before car tinting you should have these tools in your kit so you have everything on hand when you need it:

    • Clean shop towels
    • Mixing cups
    • Stirrers
    • Paint sprayer
    • Tape and masking paper
    • Sanding and polishing tools
    • Safety equipment
    • Solvents for cleaning surfaces
    • A good quality primer
    • Body fillers for repairs if needed
    • Clear coat

    Don’t rush the preparation work. You want to get it smooth and perfect before the final paint gets applied. Check your inventory and make a final list of the auto paint supplies you’ll need.

    ]]>
    www.duyi34.icu 2018-07-16 16:14
    <![CDATA[No More Car Scrathces!!! 9 Tips Help You Prevent and prepare Your Car Scrathes]]> Are you exaperating with your car scratches,always not knowing how to deal with it?

    Do not worry too much,all you just need is to know how.

    Here are several tips on how you can prevent scratches from appearing on the paint of your car:

    (1) If you can, take care not to park your car in places where a lot of people are probably going to pass by it. These include near supermarket entrances or next to vehicles that were not parked properly. You can never tell when sharp items carried by other people might scratch your car and you can be sure that careless owners will show the same utter lack of thought to your car as they do to their own.

    (2)Always drive with care and steer clear of narrow lanes that may have overgrown bushes that could scrape the paint job of your car.

    (3) Be regular about washing your car. This is the only way you can get rid of abrasive dirt from its body. Make sure to use lots of water and start washing from the roof down. Bad automatic car washes and careless washing can lead to probable dirt abrasion into the surface of your car paint, thus causing damage, swirl-marks or unappealing scratches.

    (4) Keep in mind to never wipe away dirt or grime from the surface of your car with the use of your hands or with a dry cloth. There is a huge possibility that the dirt will nick your car paint.

    (5)Even with great care, there are really instances when you cannot prevent scratches from appearing on your car paint. In times like these, there is nothing else you can do but repair them. To fix scratches, you have to remove the paint that surrounds the blemish right down to the level where it can no longer be seen. You can use a cutting compound with mild abrasive properties for this.

    (6)There are cars that come with metallic paints that comprise of lacquer paint over a base coat and this usually protects the actual color layer. It is unfortunate for cars to have this kind of paint job because while lacquer is more resistant when it comes to scratches, any blemish on it can be more complicated to repair and may be more noticeable. Removing the lacquer layer, right down to the scratch level, can be more intensive and energy exhaustive.

    (7)Although deep scratches are better taken care of by professionals, you can take care of them yourself. You can do this by using high quality wet and dry sandpaper with a grit of P1500 to P2000 with lots of cold water before using a compound paste to polish the area of the scratch.

    (8)If you have been a victim of vandalism or you were part of an accident that caused minor impact damage to your car, this could result in scratches that go down to the metal of your car or your paint’s primer. This kind of scratch will need for the repainting of the whole damaged panel of your car. For a more polished repair, the neighboring panels may have to be painted as well.

    (9) You should get the advice of a professional if you think your car needs to be repainted in order to fix a scratch. You should not attempt to do the repairs yourself with just any aerosol paint as you could end up doing more damage than good. Remember that if you wish for your car to look as good as new after the repair, you need to take extra care in fixing any blemishes. You need the right kind of car paint as well as the know-how with regards to its application.

    ]]>
    www.duyi34.icu 2018-07-09 15:38
    <![CDATA[Tips for Your Knife Care]]> All of the knives need proper care if you want them to perform to their full potential.

    Modern knife steel is very high quality material, but all metal will corrode through time. Occasionally oil the joints and springs of a pocket knife with a drop or two of oil. This will assure easier opening and closing and will prevent rust and lessen wear. Wipe the blades now and then with an oil-moistened cloth to prevent rust- especially if you live in a damp climate or close to the ocean. If your blade should get wet, dry it thoroughly. If your knife comes into contact with salt water or any substance you are not certain about, you should rinse it immediately with tap water, dry it and apply a light coat of oil.

    Do not store knives in their sheaths. The leather collects moisture and creates pits on the blade.

    Check the locking notch of lockbacks regularly to ensure that it will work properly. Keep all sand and grit out of the knife. Keep the mechanisms clean. Remember to never rely on a folding knife to be permanently locked in position.

    Do not use the cutting blade as a can opener, chisel, pry bar, screwdriver or for any heavy work for which your knife was not designed. Also, don't use the back of your knife as a hammer. It may break the springs, handles or pin.

    Handles made of wood can be occasionally rubbed with furniture polish or oil. Brass can be polished with household brass polish.

    Remember to keep your knife sharpened -- a dull blade can be more dangerous than a properly maintained one.

    For more window tinting knives or cutters tools,please click here:http://www.duyi34.icu/knives-and-razor-blades/

    ]]>
    www.duyi34.icu 2016-07-06 13:14
    <![CDATA[Before Your Tingting,You should Know....]]> Never Install on front windsheild. With the exception of visor strips, it is illegal to tint your front windsheild. To View the tinting laws in your area please Click Here.
    There is a clear liner attached to the film to protect the adhesive. To discover which side is the liner side, use to small pieces of transparent tape to pull a corner of the film apart. You will find 2 layers, the clear layer is the protective layer.
    It is best to install the film with the vehicle in a shaded, well lighted, wind and duct free inclosure between 40 and 90 degreed F; where the weather will not freeze for atleast 3 days.
    It is best to clean the vehicle inside and out before installing the film to minimize contamination.
    Read ALL of the intructions before beginning.
    Apply the film on the inside of the windows only, never on the outside.
    You can never use too much application fluid!
    Creases cannot be removed. Handle film carefully and do not crease it.
    It is best not to apply tint film, or let it dry, in direct sunlight.
    Always use a sharp razor, never scissors, to cut or trim film.
    Tint can be installed on factory defroster lines, but cannot be used on plexiglass, plastic or vinyl.
    Window film actually makes rear defrosters work better, but do not scrape defroster lines with the razor when cleaning or preparing. Just squeegee carefully.

    Do not use on thermal or double paned windows.

    Buy window tint installation tools, please view our site:http://www.duyi34.icu/

    ]]>
    www.duyi34.icu 2016-06-20 16:53
    <![CDATA[How Does Window Tingting Develop?]]> The first instance of window tinting as we know it stems from America around the time of World War II and the years following.  One of the more popular tinting manufacturers were EZ Eye factory tint.  You could find this tint sometimes on the ’40 Mercury Romango from Detroit, or later, the ’58 Chevy Impala.

    If you couldn’t get the windows tinted from the factory, some people took a swing at tinting at home for the first time.  However, this is before window film was invented, so they used spray-on tinting.  The result was a dark and usually uneven tint, so when window film was invented in 1966, it changed the window-tinting game.

    The film started off as “dye-based,” which had poor heat rejection, and would absorb heat into the vehicle, rather than reflect it back.  It also had a tendency of turning purple and bubbly in the sun, and didn’t have a very long lifespan.


    A second generation of window film emerged in the early nineties. This film was constructed of metal integrated with dye. This “hybrid” film contained dye to absorb heat and metallic particles to reflect the sun’s rays, and therefore heat. It approached 50% heat reduction. The major drawback with metallized films is interference with electronic devices like GPS and sometimes radio.

    The newest edition to the window tinting industry is ceramic films.  These are the top of the line. They last a lifetime or longer, reject heat and UV rays, and do not interfere with electronics.  We have come a long way in the window tinting world, and are only coming up with new and exciting ways to improve upon our product!

    So, buy window film,some tint tools, then start to tint your car by yourself!


    ]]>
    www.duyi34.icu 2016-06-02 11:43
    <![CDATA[Why There are so Many Types of Squeegee?]]> Why there are so many kinds of squeegee?Have you ever wondered this question or how to choose the correct one you’re your project needs? Here are some tips on how to choose the right squeegee for your style or a particular project:

    1. Shapes
    Squeegee blades come in different shapes and it is very important to choose the right shape for the job to get the best result:

    a, V-Shaped (single or double-bevel): This shape is used for printing on uneven or cylindrical-shaped substrates

    b,Square (also called Straight Edge): The most often used by screen printers is square-edge squeegee blade. It works well for standard or regular ink applications

    c,Round (or ball nose): The round blade is used for a heavy deposit when printing special-effects inks. The round shape of the blade passes more ink through the screen and is often used for printing gel or puff inks

    2. Handles
    A squeegee consists of two parts: the blade and the blade holder. It may seem like a simple design or unimportant, but the blade holder comes in different shapes and materials each designed for different functions.

    For manual screen printing, for example, the holder essentially becomes the handle of the squeegee. It is important how the handle feels to the printer when holding the squeegee, especially after several hours of printing.

    Wood, aluminum or plastic are the most popular materials used for handles and each of these materials have its fans. For example, some love the organic feel of the wooden handles and the warmth of wood. Conversely, fans of plastic or aluminum like their easy-to-clean properties. Squeegees with aluminum or metal holders are generally used with automatic printing machines, where the blades can be replaced.

    Some handles that are designed to allow blade replacement so be sure to check how easily the replacement can be made. Some designs feature easy to undo clips while others have to be screwed in place for example.

    Another consideration when choosing handles is the shape. Ergonomic handles are on the market today that help combat fatigue and stress-related, repetitive injuries. Handles also come in different heights, most commonly are 4- and 5-inch widths depending on whether you have large or small hands.

    3. Durometer
    As a rule, squeegee blades are now made of polyurethane vs. rubber. Durometer is a measure of the squeegee blade’s hardness. A lower the value the softer the blade. For example:50-60 durometer indicates a soft squeegee;60-70 durometer is a medium-hard edge;70-80 durometer indicates a hard blade

    Like the blade’s shape, the different durometers also determine the amount of ink that is deposited on the fabric. The soft blade deposits more ink than the hard blade. Here are some basic rules of thumb: For general projects, printers usually prefer a hardness of around 70-75 durometer;A 55 durometer (soft) blade would be good for printing gels and puff inks, as these types of ink require heavier deposits. A soft blade also may be used to lay down more ink on heavily textured fabrics;An 80 durometer blade is great for printing a fine, detailed print or four-color process prints

    4. Composite Blades
    To take a simple tool and make it even more useful, there are squeegees with composite blades. This means two or more blades of differing durometers can be either stacked or sandwiched together. For example, a 70/90/70 composite blade is made up of a hard blade wedged between two softer ones. The idea is that the hard blade supports the squeegee, whereas the softer blades still allow for a good amount of ink to be deposited.

    In the end, printing preferences and job types determine whether the screen printer chooses a single or a composite blade.

    We suggest you try the different squeegee blades and see if the high-tech ones are better suited to your printing style.

    5. Length
    Lastly, it is important to determine the length of the squeegee needed for the screen. Many squeegees can be purchased by the inch. Be sure the screen’s width and design’s width are taken into account when choosing the right squeegee for each job.


    Now let's choose a Window Film Squeegee for your tinting,just click here.

    ]]>
    www.duyi34.icu 2016-05-18 15:22
    <![CDATA[How to Select An Excellent Squeegee for Your Tingting Work?]]> Of all the components of window tinting,squeegee is one of the most important tinting tools.


    Squeegees are made from 3 basic types of materials: Rubber, Neoprene, and Polyurethane. The least expensive Squeegees available are those constructed of natural rubber. While commonly used in the education part of the screen printing industry, rubber tends to suffer from poor abrasion resistance and poor resistance to strong solvents. Neoprene, a synthetic rubber compound made from a chroline derivative of acetylene, is also a popular Squeegee material. Neoprene is slightly more expensive than natural rubber, and it offers better chemical and abrasion resistance.


    Polyurethane, a syntethic plastic material, is often used to make Squeegee designed for extended use, and for automatic and semi-automatic equipment. While urethane is more expensive than rubber or neoprene, it offers a much better resistance to both physical and chemical abrasion. Most urethanes used in the screen printing industry are MDI based Polyester. The reason being the MDI urethanes offers the best abrasion resistance of any urethane on the market. Polyurethane Squeegees are the most popular of all Squeegees. They are cast in liquid form in open molds, close molds or centrifuges. The material is a thermoset plastic, and cures when exposed to heat for a period of time. The material is made in sheets or individual sections, and then cut to size for shipping. The most common sizes are the following: 3/8 x 2 for general Screen printing(graphics, textile, glass, electronics), 3/16 x 1 for bottle, cd, and high speed automatic presses.


    Durometer:When selecting a Squeegee, the first task is to determine your desired durometer, or hardness. The durometer is the value that reflects the physical hardness of the Squeegee material. The Squeegee durometer values from 50A to 95A. This is measured by a durometer gauge, and measured based on standards established by ASTM procedures. (American Standard Testing materials) . For the sake of simplicity, we will call soft - 60A, medium - 70A, and 80A - a hard Squeegee, and 90A -extra hard. Plastics/Squeegees are measured in various scales of hardness. Shore A scale is the most widely used for measuring Squeegee material. The values are based on readings There are many different styles of durometer gauges available on the market. All of the durometer gauges on the market have a dial indicator with a small needle head that measures the hardness of the Squeegee. A durometer gauge is identical to a tension meter. Like a tension meter, a durometer gauge should be calibrated on a regular basis. (1 time per year). The small needle head penetrates into the material, and indicates the hardness of the rubber.


    ]]>
    www.duyi34.icu 2016-05-06 14:40
    <![CDATA[How to Extend the Life of Your Wiper Blades?]]> Common Wiper Problems:

    1, Streaking occurs when the rubber squeegee dries, hardens and cracks. It can also be caused by tree sap, road tar and other foreign substances collected on either the glass or the blade.

    2, Skipping occurs when the blade develops a curvature from lack of use (e.g. left in the ‘parked position’ for an extended length of time).

    3,Wearing occurs with extensive use and is when the rubber edges are rounded instead of squared.

    4,Splitting is caused when the sun’s ultraviolet rays penetrate the rubber squeegee, causing it to breakdown and separate from the frame.

    5,Bent Refill Vertebra and Bent Frames cause inconsistent contact with the glass surface, creating streaking or skipping.


    In order to extend your wiper's life,you should do take mesures as the following:

    1,Clean your windshield every time you fill your gas tank.

    2,Gently wipe the rubber squeegee with a damp paper towel to remove any loose dirt or oil.

    3,Never use your windshield wipers to de-ice your windshield. Instead, either use an ice scraper or use your defroster to melt snow and ice.

    4,Pull your wiper blades away from the windshield during winter months to prevent ice build up on the rubber squeegee and to prevent them from sticking to the windshield.

    Efficient wiper blades are as important to a vehicle’s safe operation as clean oil and good tires. So remember to change your wiper blades at least once a year, to inspect them frequently for wear and tear and to enjoy the view!


    ]]>
    www.duyi34.icu 2016-04-22 15:23
    <![CDATA[Maintaining Your Squeegee--Suggestions from A Professional Tinter]]> We all know that damaged squeegee rubber is number 1 cause for glass streaks, smears and hazing. even if you have the best window cleaning skills, you still can not produce absolute window glass clarity if you don't have good quality rubber in your squeegee.

    here's 4 helpful tips on how you can get the best results from your squeegee rubber and reduce streaks:

    1. replace squeegee rubber often
    the rubber edge that makes contact with the glass should be as square as possible.
    squeegee rubber will dull and it's edge will round with continued use. this is o.k.... for a while but, a rounded edge will require you to add more contact pressure to glass in order to completely remove window cleaning solution.
    and, will leave "rubber smear" when in contact with dry glass. like when you are using overlapping squeegee strokes.
    i've examined some of my diy customer's squeegee rubbers who have asked me about why their window cleaning attempts were leaving so many streaks.
    usually, i'm shocked to see how round their squeegee rubber is... they should have replaced the rubber much, much earlier!

    to get the best window washing results, examine squeegee rubber edge and replace at the first sign of: rounding,
    abrasions and worn corners.In my window cleaning business, i will replace my squeegee rubber as much as once or even twice a day. my reputation depends greatly upon achieving the highest quality window cleaning clarity for my customers.
    simply put, i don't ever risk using worn or rounded squeegee rubber on the job.

    2. flip your squeegee rubber. there's 2 usable sides!
    flip or replace squeegee rubber:
    a) stretch squeegee rubber out end of channel (if you have a squeegee handle that holds rubber in place with "teeth", then you'll have to remove channel completely off handle before beginning)
    b) remove clip from one end of rubber and save it in your tool box
    c) turn over squeegee rubber or replace
    d) insert rubber into squeegee channel with new or unused edge facing glass

    3. remove 1 of the 2 channel clips or plugs... permanently!
    unless it's a "clipless" design, your squeegee will have either brass, stainless steel, or plastic clips / plugs at each end of the squeegees channel. squeegees come with 2 clips. you can get rid of 1. this will allow squeegee rubber to lay more naturally in squeegee channel and will produce a better window cleaning result.
    an exception to the 1 clip rule: if you are using a sorbo squeegee channel with 40 degree ends instead of a standard 90 degree channel end, you might want to continue using both clips due to the nature of it's design.
    the problem with using 2 clips or plugs is it's difficult to get the squeegee rubber to lay flat... it either gets stretched too tight and will "bow-up" at ends or will be too loose and have a "warble" in the middle. either way, you'll have a greater chance of leaving streaks on glass.
    to solve this problem, get rid of 1 channel clip. save the clip. clips and plugs will eventually wear out and you'll be glad to have your saved spare clip handy.

    4. cut off torn squeegee rubber ends
    depending on the abrasive quality of the window framework, the squeegee rubbers' "tip and tail" will wear at different speeds. and since tips and tails will wear much faster than the rest of the squeegee rubber, you'll want to consider fixing the tips rather than throwing the squeegee rubber away...
    here's how to cut off rubber ends:
    a) stretch squeegee rubber out end of channel (if you have a squeegee handle that holds rubber in place with "teeth", then you'll have to remove channel completely off handle before beginning)
    b) remove clips from rubber ends
    c) place rubber flat on an appropriate cutting surface
    d) use glass scraper or razor blade and cut off damaged ends. make sure to cut rubber ends to a square 90 degree edge. and, don't cut off too much; squeegee rubber must still have enough length to fit entire length of squeegee channel.
    e) place 1 clip back on 1 end of rubber.

    f) insert rubber into squeegee channel. finish by placing channel back into squeegee handle


    Final thoughts:

    with proper maintenance, you can get a lot of mileage from your squeegee rubbers by trimming rubber ends and flipping rubber when needed. but, when main rubber edge becomes worn and optimum window cleaning results can no longer be achieved, it's a smart move to replace squeegee rubber to give your customers the 100% satisfaction of picture perfect windows they deserve.


    If you want to buy a new window tint squeegee,click here:http://www.duyi34.icu/Squeegees/


    ]]>
    www.duyi34.icu 2016-04-09 11:04
    <![CDATA[Do you Know the Types of Sprayer?]]>

    Compression Sprayers:

    (Also described as tank or pump-up sprayers). These sprayers have a tank that will hold anywhere from a liter to several gallons of pre-mixed product. You measure the amount of product recommended for the amount of water the sprayer holds, mix them together and then pump up the sprayer. The compressed air forces the mixture out through a nozzle or wand. The advantage of a compression sprayer is that it delivers the most accurate a dilution in the finest spray, minimizing run off. Another advantage is that you can take it anywhere you can carry it. The length of your hose does not limit you. They also are easier to use in tight places.


    Hand Pump Sprayers:

    Just like the hand-pumped sprayer that comes with a window cleaner, many garden products come in a ready-to-use dilution with a hand spray top. All you need to do is read the label for precautions and recommendations, then squeeze. The advantages to this type of mister are that it is economical; extremely portable delivers a fairly fine spray and is easy-to-use. The disadvantage is that if you have a large area to spray, it can be very tiring to use.


    Hose-End Sprayers:

    There are several variations on this type of sprayer. These sprayers are empty and adjustable to be used with any number of products and different dilution rates. All hose-end sprayers are used with concentrated products. Most have an on/off valve. They mix water from your hose with the product as it passes through the nozzle, using your own water pressure to power the sprayer. They all have the advantage of being lightweight and inexpensive. Since they are powered by water pressure, they tend to be able to spray farther than other types. They also have some disadvantages. They put out such a large water/product droplet that much of the product runs off the plant and you end up using a lot more of the product.


    Ready-to-Use Hose-End Sprayers:

    These sprayers are the ones that come attached to the container of the pre-mixed garden product. The advantages of these sprayers are that they make the product more convenient to use since they don’t require any mixing or measuring. They are already calibrated for that product. You just attach it to your hose and spray. The disadvantages are that these sprayers can only be used with their specific product and cannot be adjusted for use with anything else. Because they put out large droplets of the product mix they are not as efficient. The dial hose-end sprayers are very easy to use. You simply pour the liquid product into the sprayer, put the top back on and (following the recommendation on the product you are using) set the dial to the recommended rate (such as 2 tablespoons per gallon). Then you attach your hose and spray. The dial hose-end sprayers do not require you to measure out a specific amount of the product. Once you have finished spraying, you can pour the remaining product (it has not been diluted) back into its original package. The disadvantages of dial hose-end sprayers are the same as all other hose end sprayers.


    Hose-End Sprayers without a Dial:

    If you have this type of sprayer, it would really be best to replace it with one with a dial. They are much more accurate. These sprayers are complicated and can be very confusing. These sprayers are not ready to use. They have their own jar (usually plastic) and require measuring and premixing of the chemicals. It will say on the label of the jar that it is a 4 gallon, 6 gallon or larger. Those capacities indicate how many gallons of spray can be made at once with the sprayer. The semi-concentrated water/product mixture in the jar is siphoned out as the water passes through the spray head.


    We are a professional window tinting tools manufacturer, of course we may provide sprayer, our window tinting sprayers are including trigger sprayer,pump sprayer,tank sprayer and pressure sprayer.

    ]]>
    www.duyi34.icu 2016-03-24 10:51
    <![CDATA[Do You Know How to Use Your Scraper Safely?]]> Scraper plays an important role in window cleaning and tinting. With the help of a power scraper, you can remove tiles, old paint or wallpaper in a fraction of the time it would take to do so by hand. Like all other power tools, the use of a power scraper requires you to follow some important safety precautions.

    1 Work in a Clear, Well Lit Area.A power scraper contains sharp chisels that move at high speed and force to remove bits of unwanted material from surfaces. To prevent accidents, you must work in a well lit area. Avoid clutter around your work place as well.

    2 Keep Power Scraper Away from Moisture.Like all power tools, a power scraper must be protected from moisture. Never use a power scraper in wet conditions, as this can cause electric shocks. Leaving the tool exposed to the weather can also damage it and cause it to malfunction.

    3 Wear Adequate Protection.When you work with a power scraper, you must always wear safety goggles, because there is a high risk of flying particles. You can also wear a face mask to prevent fume inhalation and use ear protection to prevent damage to your hearing.

    4 Ensure a Steady Footing.Wear heavy rubber soled footwear to improve your footing and also to reduce the chances of electric shocks. Never overreach or stand on an unsteady, wobbly surface.

    5 Store the Power Scraper when it is Not in Use.After you finish work, you must store the power scraper in a safe place. This will keep it protected from the weather and also keep it away from the wrong hands.

    6 Disconnect the Power Scraper before Changing Chisel.Every time you have to change the chisel or bit, you must turn off the power scraper and disconnect it beforehand. Leaving it on may lead to accidental starting and can cause severe injury.

    7 Perform Required Maintenance.Follow the manufacturers recommendations for lubrication and maintenance of the power scraper. It is advisable to have maintenance and repairs performed by qualified personnel only. If you do the maintenance yourself, practice extreme caution and unplug the tool beforehand.

    8 Avoid Forcing the Power Scraper.Never apply excessive force when you are using a power scraper. This will lead to unsatisfactory results and will also increase the chances of the tool buckling backwards.

    9 Never Touch the Chisel Immediately after Finishing a Job.After you finish working, the chisel will be extremely hot for some time. It is therefore necessary to keep the tool aside for some time after an operation. Change the chisel when it is cool to the touch.

    10 Carry the Tool Carefully.When you carry the power scraper around, hold it by the handle and avoid touching the switch. Never carry the tool by its cord. Never pull on the cord to unplug the tool and avoid yanking the cord around.


    Are you ready to buy Car Window Tint Scraper Tools to tint your car,TintingTool.com is your best choice!


    ]]>
    www.duyi34.icu 2016-03-03 10:39
    <![CDATA[Do You Know the Correct Way to Use Pressure Sprayer?]]> Sprayers come in either plastic or metal, and in a wide range of sizes; some backpack sprayers have a pump handle so you can keep up the pressure inside the tank without having to take off the backpack. Here's how to use these tools.

    Test the sprayer every time you use it by first filling it with water. Pump up the pressure and test to see that the nozzle is not plugged. Release the pressure by unscrewing the lid slightly. Remove the lid.Measure the amount of chemicals exactly. More is not better in the case of garden chemicals. You can do serious injury to plants by overfertilizing or adding too much herbicide.Add the chemicals to the water in the sprayer. Rinse the measuring device by adding more water to the tank to make up the balance.Screw the top on, being careful not to cross the threads. Tighten so that the pressure will not escape from the tank.Pump the handle to increase the pressure inside the tank.Spray the plants, making sure to cover both upper and lower sides of the leaves. There needs to be visible moisture on the leaves for the applied material to work.Spray out all of the material in the tank. Don't leave any unused chemical in it.Clean the empty tank over a dirt area, never over concrete or in a sink. Rinse the tank three separate times, spraying clean water through the nozzle each time.Store with the cap off in a protected area away from light and heat.

    As a window tinter, I used many different window tinting sprayers, such as tinting trigger sprayer, window tint pum sprayer, window tint tank sprayer and window tint ppressure sprayer, triggler is better, I think.


    ]]>
    www.duyi34.icu 2016-02-19 10:25
    <![CDATA[Several Ways to Make your Home & Car Window Cleaner]]> It is better not cleaning windows while they are in direct sunlight. Your cleaning solution will dry too fast.You should keep the squeegee blade dry by wiping it with a tinting microfiber cloth after each stroke.You should replace the rubber blade of your squeegee when necessary. The smallest nick in your blade can cause streaking.You should squeegee in a pattern from top to bottom, or side to side.When cleaning the inside and outside of your windows, work the top to bottom pattern for inside windows and side to side pattern for outside windows. By doing this, you'll be able to identify which side of the window any streaks may occur.If you find the water on the window is muddy looking, the grains of dirt might be catching the rubber when you squeegee. Wash the window again, using extra water to flush the excess dirt from the window.If you find excess soap and foam in the water, look into your bucket for soap foam. An inch or more is too much. Fill again with clean water.You may use a spray bottle filled with rubbing alcohol on French windows. Spray four windows, scrub them, and squeegee. The alcohol will evaporate, leaving nothing to wipe.

    Here are some Tinting Lint Free Towel, go ahead: http://www.duyi34.icu/cleaning-pads-and-cloths/

    ]]>
    www.duyi34.icu 2016-02-06 09:36
    <![CDATA[Does Window Tinting Film Do Any Good?]]> A lot of people have this false impression that tinted glasses do nothing else however assistance keep your room cool. Absolutely nothing might be even more from fact for they offer a number of other advantages.

    Obviously, they help you reduce in energy costs by allowing you to minimize the usage of the air-conditioner. However, the most crucial function that house window tinting provides for you is to obstruct the harmful ultraviolet rays from the sun. Today you can easily get a house window film that can obstruct virtually 99 percent of ultraviolet rays in the market.

    Not only does this protect your eyes and health, it will likewise assist your decor and other decors from getting faded. Moreover these window tints will likewise enhance your tv viewing experience too. Not will you be interrupted by the glare originating from outdoors your house. The option of tint depends on just what you want to accomplish with it.


    So, you may tint your home glass or car window glass for obstructing the harmful ultraviolet rays from the sun besides cooling, what you need to do is buying film and professional tint tools from website, and finish it on the weekend,that's it.

    ]]>
    www.duyi34.icu 2016-01-27 17:06
    <![CDATA[What is the Difference between Carbon Steel Blade and Stainless Steel Blade?]]> Here is the article about knife blade of Window tint knives, let us beginning:


    Knife blade for film cutting was usually made of carbon steel or stainless steel.

    But do you know the difference between these two materials?


    There are also many other types of stainless steels, but these are different in composition and structure and are rarely used in edge applications, since the edge properties are inferior to those of martensitic stainless steel grades.

    Difference between carbon steel and stainless steel

    There are two main differences between carbon knife steel and stainless knife steel. The first is that stainless steels have much higher corrosion resistance, due to the protective chromium oxide layer that covers the steel surface after heat treatment. The second difference relates to the alloying elements that form carbides. Stainless steels contain at least 10.5% by weight of chromium. The carbide particles provide the steel with significant wear resistance. The carbides are bonded together by the steel matrix.

    The importance of carbide size

    A knife steel with large carbides is generally very difficult to regrind, since the carbides crumble out of the edge and cause a 'saw edge' instead of a razor-sharp edge. Sandvik produces knife steels with fine carbides which enable excellent edge sharpness.

    Combination of knife steel properties

    The table shows combinations of knife steel properties for different classes of steel. Note that corrosion is detrimental for the cutting edge. Consequently the lack of sufficient corrosion resistance also affects knife performance and not only the esthetics of the blade.


    We provide both carbon steel and stainless steel knives blade of window tint cutters, for more details,please chlick here:http://www.duyi34.icu/knives-and-razor-blades/




    ]]>
    www.duyi34.icu 2016-01-18 14:35
    <![CDATA[How to care and maintain various scraper?]]> Do you have to change your scraper in a frequent time?

    Do you expect to keep your scraper a long-time usage?

    Here are some suggestions for you:


    * You should keep you scraper seprately from other auto window tint tools to help prevent damage to their cutting edges.Whilst not in use, scraper blades should be stored wrapped in an oiled rag to help prevent rusting.


    * Plastic-handles scrapers should not require any maintenance, but wooden handles may require sanding down to remove splinters and occasionally rubbing with linseed oil to help prevent them from drying out and splitting.


    * The blades of engineer's scrapers need regular sharpening to maintain an effective scraping edge.


    Wooden handles will need sanding down if splinters form, and will need replacing if they split.


    If the scraper shaft becomes bent or damaged, then you should replace the scraper.

    New blades should be purchased once it is no longer possible to sharpen the existing blade so that it efficiently scrapes. If your scraper does not have removable blades, and can no longer be sharpened so that it scrapes effectively, then you should replace the scraper.


    For more window tinting scrapers products, click here: http://www.duyi34.icu/scrapers-and-blades/



    ]]>
    www.duyi34.icu 2015-12-20 11:05
    <![CDATA[Tinting as a Professional--Start with a Good Squeegee]]> Choose good squeegee

    The keys to success are buying a good squeegee and keeping it fitted with a sharp, new rubber blade. The same high-quality window washing tools the pros use are readily available at home centers and full-service hardware stores. The whole setup is inexpensive and will last many years. In addition to a 10- or 12-in. squeegee you'll need a scrubber, a bucket (a 5-gallon plastic bucket will work), hand dishwashing liquid and a few tinting lint-free towels or small towels.

    Replace your blade frequently.

    Look for replacement blades, also called rubbers, where you buy the squeegee and pick up two or three to have on hand. The pros we talked to change their squeegee blades as often as once a day. That's because you just can't do a good job if the edge of the blade becomes nicked, sliced or rounded over with use. If your squeegee leaves streaks or just isn't performing like new, don't hesitate to replace the blade . You can get a little more mileage out of blades that aren't nicked or sliced by simply reversing them to expose a fresh edge. When you store the squeegee, make sure nothing touches the blade.

    You don't need fancy buckets or special soap. Any large bucket will do. Just add a couple of gallons of water and about a teaspoon of dishwashing liquid and you're ready to go. In warm weather, you'll get a little more working time by using cool water. If you've procrastinated so long that you're washing windows in below-freezing temps (I learned this the hard way), add wind shield washing solution until the water doesn't freeze on the glass. Scrubber or sponge? It's up to you. A scrubber works great and is worth buying if you have a lot of medium to large panes of glass. But a good-quality sponge is all you really need, especially if most of your windowpanes are small.


    For you reference,here are more window tinting squeegees:http://www.duyi34.icu/squeegees/




    ]]>
    www.duyi34.icu 2015-11-23 17:35
    <![CDATA[How to Evaluate Automobile Window Tinting]]>

    After paid for your auto window tinting, you should inspect the job to be sure it is satisfactory.


    Is the window film applied in a single piece or is it cut into strips that surround the defroster lines?

    The best tint shops always apply film in a single piece. Now look at the borders of the rear window, in many cars there is a black ‘frit’ edge on the window, Make sure the window film is securely attached to the frit as well.


    Pay attention to side windows. The window film should be applied to the inside and be completely flush against all 4 edges of the window. Now look at the window film itself. Don’t worry if the film looks slightly streaky or discolored; window film takes a couple weeks to dry out and become completely clear. But if there are bubbles of air under the film or the film itself is not completely flat against the window, this is a sure sign of sloppy tinting.


    If you still don't pay for your auto window tinting, you may try do it yourself, the first thing is to buy some Film Installation Tools, or Wrap Tools for you vinyl wrapping.

    ]]>
    www.duyi34.icu 2015-10-14 15:12
    <![CDATA[Pay Attention to these Factors During Your Tinting Process]]>

    Benefits of Tingting

    Tinting does cost money,but it  has many benefits. It protects your car windows; helps keep your car cool and avoid overheating; protects your skin from harmful ultraviolet (UV) rays; and it provides accident pngrotection by holding shattered glass together, thus protecting the inside occupants. Tinting can also reduce harmful rays from the sun and other car headlights, helping you drive safely. In addition, it protects your privacy and contents within a car, and it prevents cracking and fading of car upholstery due to harmful UV rays.
    Choosing the right tinting is essential. Below are few tips for choosing a car window tinting that gives both style and elegance to your car.

    Familiarize yourself with various options
    The more information you have about various tinting options, the better it is for you. You can visit a window tinting shop to learn more about the options.
    Get the best quality as far as possible.

    Learn state tinting laws
    To find out about car tinting regulations in your state, you can contact a local car tint applier or search online. Most states have specific regulations for tinted windows. A dark tinted window makes it difficult for law enforcement to identify hit and run culprits or criminal suspects during traffic stops. Hence, it is necessary to find about your state’s tinting laws before you set out to make a purchase.
    Let the tinting be done by a professional.

    Places should be tint
    side mirror and rear mirror.Lighter shades of window tint will  be safer on rear and side windows since darker shades can obscure windows, which will bring danger when you are driving.


    Maintain your window tint

    Once the tinting is complete, wait for a few days before cleaning and rolling down windows. After applying tint the installer usually cleans the window. It is advisable to use a soft towel or ammonia-free soap cleaner.

    Protect your car from overheating and fading. Surely your car will look stylish with a solid tinting job, just be sure to be well-informed before getting it installed.


    Buy professional tinting tools and car wrapping tools,TintingTool.com is the best choice.


    ]]>
    www.duyi34.icu 2015-09-22 17:22
    <![CDATA[Tips For Glass Tinting]]> Here are some helpful tips for tinting your auto glass.

    1. Make Sure the Tint Complies With Local Laws

    Remember to check ordinances in your area. According to federal regulations, window tinting must allow at least 70 percent of light to pass through the front windows. People can only tint the top 4 to 6 inches of the windshield. Other rules depend on the state. There is no limit on how much back windows can be tinted in most locations. However, many states prohibit tints with colors like red, blue, amber, and yellow. In other states, laws only allow law enforcement officers to use colored window tints. Some states also regulate or prohibit metallic or reflective tints. A black, non-reflective tint is the best choice for most people, especially for those who visit other states often.

    2. Gather the Right Supplies

    After you choose the best window tint for you, make sure that you have all the other supplies you need before installing it. It is also a good idea to check the weather so that rain does not interrupt the application. Window tinting kits have window tints that are pre-cut for particular models of cars. Here are the window tint tools supplies that you will need.

    Glass cleaner

    Masking tape

    Baby shampoo and bottled water

    Spray bottle

    Knife or cutter

    Butcher paper

    Small squeegee

    3. Prepare the Area Well

    According to WindowTint.com, the car and especially the glass should be perfectly clean so that the window tint bonds well to the windows. Wash the entire vehicle with water and soap designed for automobile washing. Then, dry the car with a lint free towel. Window tint is attached to the inside surface of windows, so those surfaces also need to be cleaned with glass cleaner before applying the tint. To keep tiny pieces of felt from getting trapped in the window film, cover the felt edge at the bottom of the window withmasking tape. If the vehicle is equipped with a third brake light or another accessory attached to the rear window, remove it. This will make cutting and installing the window tint on the back window easier. People who choose to buy a window tint tools kit for their model vehicle instead of cutting their own tint will not have to cut around an accessory. Reattach any accessories when the window tint application is complete.

    4. Avoid and Remove Bubbles

    Avoid bubbles in the tinting film by working diagonally from the top left corner with a squeegee or an old credit card. Use a heat gun to shrink the film evenly to the glass. This causes the water used to apply the tint to evaporate and improves its adhesion. Be patient and do not try to unpeel the window tint and start over. It will take time to get a smooth, flawless surface.

    5. Care for Window Tint Properly

    Do not lower the windows for at least three days so that the window tint can dry. Do not clean the window tint for at least 30 days. Clean tinted windows with ammonia free glass cleaner and a soft cloth. To make your auto window tint last as long as possible, park inside a garage if you can, or under some sort of shade, wash the car carefully by hand, and limit the products that come in contact with the window tint.


    If you are going to wrap your car body, we'll post another article about vinyl wrapping tools.

    ]]>
    www.duyi34.icu 2015-08-16 14:00
    <![CDATA[Saving your money and DIY your car Tingting at home]]> Have you ever thought about doing the tinting work at home instead of paying hundreds of dollars in the car shop?If your answer is yes,now please keep the following steps in mind,then start enjoying your first DIY car tingting .

    First Step: prepare your tinting tool

    You can find window-tint film at places like window film supplies. You'll also need a window-tint-film application solution, a lint-free cleaning cloth, a razor knife, a scraper blade, an application squeegee, and a heat gun. Find a dust-free place to work in (such as a garage) and avoid doing the job in excessive heat or cold or on a day with high humidity. And most important, check state laws online to find out which windows can legally be tinted and how dark you can make them.

    Second Step: clean your car

    Apply the application solution to the inside of the window. Don't over-spray onto the door trims.

    Run the scraper blade across the window from side to side, starting from the top and gently working your way down the window. This will remove any dust, grime and debris. Be careful not to gouge the glass with the blade.

    Run the squeegee across the window from side to side, starting from the top and working down the window to remove any leftover debris and solution.

    Third Step: application

    Put the application solution on the outside of the window and roll the tint film over the window with the protective-film layer facing upward. The solution will hold the film in place while you cut it to size, but will allow you to maneuver the film to make a precise cut.

    Run the squeegee over the tint to make sure it doesn't move.

    For sliding windows, roll the window down from the door frame about a quarter of an inch and cut the top and sides of the film to shape, using the window as a template. Round the edges off using your finger as a guide.

    Slide the film up about half an inch before cutting along the bottom of the window, using the window gasket as a template. This will ensure coverage beyond the base of the window. For non-sliding windows, use the window gaskets as a template and cut the film right to the edges. Spray the inside of the window with the application solution.

    Fix the film to the corner of the window with a piece of clear tape and start to peel the protective liner from the film. Spay the adhesive surface of the film with application solution as you peel. Discard the protective liner and remove the film from the outside of the window and place it on the inside of the window. Fold the bottom edge back onto itself to avoid it touching the door trim.

    Move the tint into place at the top of the window, leaving a 1/8-inch gap from the top of any sliding window. Run the squeegee along the top of the window, pushing any air and water out of the top as you go.

    Roll up the window and spray the film again with application solution. Use the squeegee to hold the window gasket out while sliding the film in underneath it. Use the squeegee to push all the air and water out from beneath the film.

    Wrap the squeegee in a lint-free cloth and run it across the entire window. The cloth will absorb any remaining application solution. Use the cloth to wipe down door trims and paint. If any bubbles or fingers of trapped air or application solution remain in the film, use a heat gun to gently warm the area and then run the squeegee over the bubbles toward the closest edge of the window. Repeat this process for all windows until the job is complete.

    For the cost of a few basic tools and materials, a DIY car tint is a worthwhile project. You'll save plenty of money and have a better insulated car.


    ]]>
    www.duyi34.icu 2015-07-28 13:30
    五月丁香缴情深爱